DELARO
325 SC Fungicide
| Table of Contents: |
Section Number: |
| GENERAL INFORMATION |
The Product |
1 |
| SAFETY AND HANDLING |
Precautions, Protective Clothing & Equipment, and Re-entry Restriction |
2 |
| First Aid and Toxicological Information |
3 |
| Environmental Precautions |
4 |
| Storage |
5 |
| Disposal |
6 |
| DIRECTIONS FOR USE |
Crop, Disease, Rate, Timing |
7 |
| Resistance Management |
8 |
| Application Precautions |
9 |
| Mixing Instructions |
10 |
| Pre-harvest Intervals |
11 |
| Notices |
12 |
For
more information, contact:
Bayer CropScience Inc.
Suite 200, 160 Quarry Park Blvd, SE
Calgary, AB
T2C 3G3
GENERAL
INFORMATION
Section
1: The Product
DELARO 325
SC Fungicide is a broad-spectrum systemic fungicide for the control or
suppression of listed diseases on dry peas, faba bean, chickpea, lentils, corn,
cereals, soybeans, potatoes, and alfalfa.
SAFETY AND
HANDLING
Section
2: Precautions, Protective Clothing & Equipment, and Re-entry Restriction.
PRECAUTIONS:
KEEP OUT
OF REACH OF CHILDREN. May irritate eyes. Harmful if swallowed, inhaled
or absorbed through skin. Prolonged or frequently repeated skin contact may
cause allergic reactions in some individuals. Avoid contact with skin, eyes,
and clothing. Wear protective eyewear. Wash
thoroughly with soap and water after handling and before eating, drinking, or
smoking. If product comes in contact with clothing, remove all contaminated
clothing, wash skin with soap and water and dress in clean clothing. Launder
applicator clothing separate from other laundry. Apply only when the
potential for drift to areas of human habitation or areas of human activity
such as houses, cottages, schools and recreational areas is minimal. Take into
consideration wind speed, wind direction, temperature inversions, application
equipment and sprayer settings. DO
NOT
enter or allow worker entry into treated areas during the restricted entry
interval (REI) of 12 days after an application to perform detasseling in corn.
For all other activities in all crops, DO NOT enter or allow worker
entry into treated areas during the REI of 24 hours. If this pest control product is to
be used on a commodity that may be exported and you require information
regarding Maximum Residue Limits for an importing country, please contact Bayer
CropScience Canada Inc. at 1-888-283-6847 or www.cropscience.bayer.ca.
PROTECTIVE
CLOTHING AND EQUIPMENT:
Wear a
long-sleeved shirt, long pants, chemical-resistant gloves, socks and boots
during mixing, loading, application, clean-up and repair. In addition, wear
safety goggles or a face shield during mixing, loading, clean-up and repair.
Gloves are not required during application within a closed cab or cockpit.
Do not
allow the pilot to mix chemicals to be loaded onto the aircraft. The pilot is
allowed to load premixed chemicals with a closed system.
It is
desirable that the pilot have communication capabilities at each treatment site
at the time of application.
All
personnel on the job site must wash hands and face thoroughly before eating and
drinking. Protective clothing, aircraft cockpit and vehicle cabs must be
decontaminated regularly.
Section 3:
First Aid and Toxicological Information
FIRST AID:
IF
SWALLOWED: Call a poison control centre or doctor immediately for treatment
advice. Do not induce vomiting unless told to do so by a poison control centre
or doctor. Do not give any liquid to the person. Do not give anything by
mouth to an unconscious person.
IF IN
EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes.
Remove contact lenses, if present, after the first 5 minutes, then continue
rinsing eye. Call a poison control centre or doctor for treatment advice.
IF ON SKIN
OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty
of water for 15-20 minutes. Call a poison control centre or doctor for
treatment advice.
IF
INHALED: Move person to fresh air. If person is not breathing, call 911 or an
ambulance, then give artificial respiration, preferably by mouth-to-mouth, if
possible. Call a poison control centre or doctor for further treatment advice.
Take
container, label, or product name and Pest Control Product Registration number
with you when seeking medical attention.
TOXICOLOGICAL
INFORMATION:
- Treat
symptomatically.
- Medical Personnel
should contact Bayer’s Medical Information Services, Toll-Free: 1-800-334-7577.
Section
4: ENVIRONMENTAL PRECAUTIONS
Toxic to
certain beneficial arthropods (which may include predatory and parasitic
insects, spiders, and mites). Minimize spray drift to reduce harmful effects on
beneficial arthropods in habitats next to the application site such as
hedgerows and woodland. TOXIC to aquatic organisms and non-target terrestrial
plants. Observe spray buffer zones specified under DIRECTIONS FOR USE.
To reduce
runoff from treated areas into aquatic habitats avoid application to areas with
a moderate to steep slope, compacted soil, or clay.
Avoid application
when heavy rain is forecast.
Contamination
of aquatic areas as a result of runoff may be reduced by including a vegetative
filter strip between the treated area and the edge of the water body.
This
product demonstrates the properties and characteristics associated with
chemicals detected in ground water. The use of DELARO 325 SC Fungicide in areas
where soils are permeable, particularly where the water table is shallow, may
result in ground water contamination.
Section 5: STORAGE
Storage:
- Store
this product away from food or feed.
- Keep away from direct sunlight.
- Keep away from fire or
open flame or other sources of heat.
- Do
not store at temperatures below freezing.
- If
stored for 1 year or longer, shake well before using.
- Store
the tightly closed container away from feeds, seeds, fertilizer, plants and
foodstuffs.
- Do
not use or store in or around the home.
- Keep
in original container during storage.
- In
case of fire, leaking or damaged containers, call toll free 1-800-334-7577.
Section 6: DISPOSAL
Recyclable
Container Disposal:
Do not
reuse this container for any purpose. This is a recyclable container, and is
to be disposed of at a container collection site. Contact your local distributor/dealer
or municipality for the location of the nearest collection site. Before taking
the container to the collection site:
1.
Triple- or pressure-rinse the empty container. Add the rinsings to the spray
mixture in the tank.
2.
Make the empty, rinsed container unsuitable for further use.
If there
is no container collection site in your area, dispose of the container in
accordance with provincial requirements.
Returnable
Container:
Do not
reuse this container for any purpose. For disposal, this empty container may
be returned to the point of purchase (distributor/dealer).
Disposal
of Unused, Unwanted Product:
For
information on disposal of unused, unwanted product, contact the manufacturer
or the provincial regulatory agency. Contact the manufacturer and the
provincial regulatory agency in case of a spill, and for cleanup of spills.
DIRECTIONS
FOR USE
Section
7: Crop, Disease, Rate, Timing
|
CROPS
|
DISEASE CONTROLLED
|
RATE
|
TIMING
|
|
Dry
peas
|
Mycosphaerella
blight
(Mycosphaerella
pinodes)
Ascochyta
blight (Ascochyta pisi)
White
mold
(Sclerotinia
sclerotiorum)
Grey
mold
(Botrytis
cinerea)
|
Apply
DELARO 325 SC Fungicide at 880 mL/ha
|
Begin
fungicide applications at the beginning of flowering or at first sign of
disease.
When
disease pressure is high or when agronomic or weather conditions are
conducive to disease development,
make
a second application 10 to 14 days later.
Use
shorter intervals for best protection.
Ensure that the area to be treated is covered uniformly. Good
spray coverage and canopy penetration are important for best results.
|
|
Restrictions:
Do not apply more than 2 applications of DELARO 325 SC Fungicide per year. After each
application, alternate with a product that does not contain a Group 11
fungicide and is registered for the same use(s). If an alternative fungicide
is not registered for the use, only one application should be applied. Do not
apply within 7 days of cutting or swathing of the crop for forage. Do not
apply within 30 days of harvest of seed.
|
|
CROPS
|
DISEASE CONTROLLED
|
RATE
|
TIMING
|
|
Chickpea
|
White
mold
(Sclerotinia
sclerotiorum)
Ascochyta
blight
(Ascochyta
rabiei)
Grey
mold
(Botrytis
cinerea)
|
Apply
DELARO 325 SC Fungicide at 880 mL/ha
|
Begin
fungicide applications at the beginning of flowering or at first sign of
disease.
When
disease pressure is high or when agronomic or weather conditions are
conducive to disease development, make a second application 10 to 14 days
later.
Use
shorter intervals for best protection.
Ensure that the area to be treated is covered uniformly. Good
spray coverage and canopy penetration are important for best results.
|
|
Restrictions:
Do not apply more than 2 applications of DELARO 325 SC Fungicide per year.
After each application, alternate with a product that does not contain a
Group 11 fungicide and is registered for the same use(s). If an alternative
fungicide is not registered for the use, only one application should be
applied. Do not apply within 7 days of cutting or swathing of the crop for
forage. Do not apply within 30 days of harvest of seed.
|
CROPS
|
DISEASE CONTROLLED
|
RATE
|
TIMING
|
|
Lentils
|
White
mold
(Sclerotinia
sclerotiorum)
Ascochyta
blight
(Ascochyta
lentis)
Grey
mold
(Botrytis
cinerea)
Anthracnose
(Colletotrichum
truncatum)
|
Apply
DELARO 325 SC Fungicide at 880 mL/ha
|
Begin
fungicide applications at the beginning of flowering or at first sign of
disease.
When
disease pressure is high or when agronomic or weather conditions are
conducive to disease development, make a second application 10 to 14 days
later.
Use
shorter intervals for best protection.
Ensure that the area to be treated is covered uniformly. Good
spray coverage and canopy penetration are important for best results.
|
|
Restrictions:
Do not apply more than 2 applications of DELARO 325 SC Fungicide per year.
After each application, alternate with a product that does not contain a
Group 11 fungicide and is registered for the same use(s). A sequential
application of DELARO 325 SC Fungicide in lentils is permitted only when
target pathogens are unique for each application. Do not apply within 7 days
of cutting or swathing of the crop of forage. Do not apply within 30 days of
harvest of seed.
|
CROPS
|
DISEASE CONTROLLED
|
RATE
|
TIMING
|
|
Faba
bean
|
Grey
mould and Chocolate spot
(Botrytis
cinerea)
White
mould
(Sclerotinia
sclerotiorum)
|
Apply
DELARO 325 SC Fungicide at 880 mL/ha
|
Begin
fungicide applications at the beginning of flowering or at first sign of
disease.
When
disease pressure is high or when agronomic or weather conditions are
conducive to disease development, make a second application 10 to 14 days
later.
Use
shorter intervals for best protection.
Ensure that the area to be treated is covered uniformly. Good
spray coverage and canopy penetration are important for best results.
|
|
Restrictions: Do not apply
more than 2 applications of DELARO 325 SC Fungicide per year. After each
application, alternate with a product that does not contain a Group 11
fungicide and is registered for the same use(s). If an alternative fungicide
is not registered for the use, only one application should be applied. Do
not apply within 7 days of cutting or swathing of the crop for forage. Do
not apply within 30 days of harvest of seed.
|
|
CROPS
|
DISEASE CONTROLLED OR SUPPRESSED
|
RATE
|
TIMING
|
|
Soybean
|
Asian
soybean rust (Phakopsora pachyrhizi)
Frogeye
leaf spot (Cercospora sojina)
Brown
spot
(Septoria
glycines)
Charcoal
rot (Macrophomina phaseolina) (suppression)
Phomopsis
stem blight (Phomopsis longicolla)
White
mold (Sclerotinia sclerotiorum) (suppression)
|
Apply
DELARO 325 SC Fungicide at 572 mL/ha
|
Begin
fungicide applications preventatively or at the first signs of disease from
early flowering (R1) to complete pod fill (R5).
When
disease pressure is high or when agronomic or weather conditions are
conducive to disease development, make a second application 10 to 14 days
later.
|
|
Restrictions:
The use of a non-ionic surfactant at 0.125% v/v may be used with DELARO 325
SC Fungicide. Do not apply more than 2 applications of DELARO 325 SC
Fungicide per year. After each application, alternate with a product that
does not contain a Group 11 fungicide and is registered for the same use(s).
If an alternative fungicide is not registered for the use, only one
application should be applied. Do not apply within 20 days of harvest.
|
|
CROPS
|
DISEASE CONTROLLED
|
RATE
|
TIMING
|
|
Corn
(sweet corn, field corn, popcorn, including corn grown for seed)
|
Common
rust (Puccinia sorghi),
Southern
corn rust (Puccinia polysora)
Eye
spot
(Aureobasidium
zeae)
(alt.
Kabatiella zeae)
Northern
corn leaf blight
(Setosphaeria
turcica, anamorph: Exserohilum turcicum)
Grey
leaf spot (Cercospora zeae-maydis)
|
Apply
DELARO 325 SC Fungicide at 572 mL/ha
|
Apply
DELARO 325 SC Fungicide when disease first appears and continue on a 7-14-day
interval if favourable conditions for disease development persist.
|
|
Restrictions: Do
not apply more than 2 applications of DELARO 325 SC Fungicide per year. For
sweet corn only, after
each application of DELARO 325 SC Fungicide, alternate with a product that
does not contain a Group 11 fungicide and is registered for the same use(s).
If an alternative fungicide is not registered for the use, only one
application of DELARO 325 SC Fungicide should be applied to sweet corn.
Do
not apply to sweet corn within 14 days of harvest. Do not harvest sweet corn
for forage within 14 days of application. For field corn and popcorn, do not
apply within 30 days of harvest for forage, grain and stover.
DO
NOT apply DELARO 325 SC Fungicide with an adjuvant in corn.
|
|
CROP
|
DISEASE CONTROLLED
|
RATE
|
TIMING
|
|
Wheat
(spring, durum)
|
Septoria
leaf blotch (Septoria tritici)
Powdery
mildew (Erysiphe graminis)
Tan
spot (Pyrenophora tritici-repentis)
Leaf
rust (Puccinia triticina)
Stem
rust (Puccinia graminis)
Stripe
rust (Puccinia striiformis)
|
Apply
DELARO 325 SC Fungicide at 572 mL/ha
|
DELARO 325 SC
Fungicide should be applied as a preventative disease control measure or at
the very early stages of disease development. Typically this application
will occur from tillering up to flag leaf emergence.
|
|
Restrictions: Do not apply
more than 1 application of Delaro 325 SC Fungicide per year to
spring or durum wheat. If disease pressure warrants successive
fungicide applications, a different fungicide product registered for the
foliar diseases present may be applied at the heading/flowering stage (refer
to Section 8: Resistance Management before making a follow-up application). Do not apply
Delaro 325 SC Fungicide within 45 days of harvest. Do not allow
livestock to graze within the treated area within 30 days after application,
and do not harvest the treated crop for forage within 30 days after
application and 45 days for grain, straw and for hay.
|
|
CROP
|
DISEASE CONTROLLED
|
RATE
|
TIMING
|
|
Wheat
(winter)
|
Septoria
leaf blotch (Septoria tritici)
Powdery
mildew (Erysiphe graminis)
Tan
spot (Pyrenophora tritici-repentis)
Leaf
rust (Puccinia triticina)
Stem
rust (Puccinia graminis)
Stripe
rust (Puccinia striiformis)
|
Apply
DELARO 325 SC Fungicide at 440 – 572 mL/ha
|
DELARO 325 SC
Fungicide should be applied as a preventative disease control measure or at
the very early stages of disease development. This could occur anytime during tillering or stem elongation.
Typically,
one application from the tillering up to flag leaf emergence is required. A
second application may be made if needed.
DO
NOT apply within 14 days of the first treatment.
DELARO
325 SC Fungicide must be applied prior to head emergence.
Timing
of Application:
Single application:
4-leaf stage up to flag leaf (GS 14-47).
Two applications: First application: 4-leaf stage to flag leaf
stage. Second application: not within 14 days of the first application and
prior to head emergence.
|
|
Restrictions: Do not apply
more than 2 applications of DELARO 325 SC Fungicide per year to
winter wheat. Do not apply DELARO 325 SC Fungicide within 45 days
of harvest. Grazing Restrictions: a) if 2 applications of DELARO SC
Fungicide per
season are applied, do not allow livestock to graze within the treated area
and do not harvest the treated crop for forage or hay. b) If 1 application of
DELARO 325 SC Fungicide per season is applied, do not allow
livestock to graze within the treated area within 30 days after application,
and do not harvest the treated crop for forage within 30 days after
application and 45 days for grain, straw and for hay.
TANK
MIXTURES WITH HERBICIDES IN WINTER WHEAT: DELARO 325 SC Fungicide applied at
an application rate of 440 mL/ha may be tank-mixed with Buctril M or Infinity
herbicides for use on winter wheat only, and during
the 2 to 4-leaf stage in the fall or from the time growth commences to
emergence of the flag leaf in the spring. Follow staging restrictions on the
Buctril M or Infinity herbicide labels. DO NOT tank-mix DELARO 325 SC
Fungicide with graminicide herbicides.
|
|
CROP
|
DISEASE
CONTROLLED
|
RATE
|
TIMING
|
|
Barley
|
Net blotch (Pyrenophora
teres)
Scald (Rhynchosporium
secalis)
Leaf rust (Puccinia
hordei)
Stem rust (Puccinia
graminis)
Stripe rust (Puccinia
striiformis)
Powdery mildew (Erysiphe
graminis)
|
Apply DELARO 325 SC Fungicide at 572 mL/ha
|
DELARO 325 SC Fungicide
should be applied as a preventative disease control measure or at the very
early stages of disease development. Typically this application will occur from tillering
up to flag leaf emergence.
|
|
Oats
|
Crown rust (Puccinia
coronata)
Leaf blotch (Septoria
avenae)
Stem rust (Puccinia
graminis)
|
|
Triticale
|
Stem rust (Puccinia
graminis)
Scald (Rhynchosporium
secalis)
|
|
Restrictions: Do not apply more than 1 application of
Delaro 325 SC Fungicide per year. If disease pressure warrants successive
fungicide applications, a different fungicide product registered for the
foliar diseases present may be applied at the heading/flowering stage (refer
to Section 8: Resistance Management before making a follow-up application).
Do not apply Delaro 325 SC Fungicide within 45 days of harvest. Do not allow
livestock to graze within the treated area within 30 days after application,
and do not harvest the treated crop for forage within 30 days after
application and 45 days for grain, straw and for hay.
|
|
CROPS
|
DISEASE CONTROLLED OR SUPPRESSED
|
RATE
|
TIMING
|
|
Potatoes
|
Early
blight
(Alternaria solani)
Brown
spot
(Alternaria alternata)
Black
dot
(Colletotrichum coccodes) (suppression)
White
mold
(Sclerotinia sclerotiorum)
(suppression)
|
Apply
DELARO 325 SC Fungicide at 880 mL/ha
|
Begin
fungicide applications preventatively. After the initial application, one
additional application may be made 10-14 days afterwards if conditions remain
favourable for continued or increased disease development.
When
disease pressure is severe, use the shorter intervals.
Ensure
that the area to be treated is covered uniformly. Good spray coverage and
canopy penetration are important for best results
|
|
Restrictions: Do not apply
more than 2 applications of DELARO 325 SC Fungicide per year. To
limit the potential for development of disease resistance to this fungicide,
do not make more than 2 sequential applications of
DELARO
325 SC Fungicide or any Group 11 containing fungicide before rotating with a
fungicide from a different Group. Do not apply within 14 days of harvest.
|
The DIRECTIONS FOR USE for the uses described in this section of the label were developed by persons other than Bayer CropScience Inc. under the User Requested Minor Use Label Expansion program. For these uses, Bayer CropScience Inc.has not fully assessed performance (efficacy) and/or crop tolerance (phytotoxicity) under all environmental conditions or for all crop varieties when used in accordance with the label. The user should test the product on a small area first, under local conditions and using standard practices, to confirm the product is suitable for widespread application.
|
CROP
|
DISEASE CONTROLLED
|
RATE
|
TIMING
|
|
Alfalfa (seed production only)
|
Blossom blight
(Sclerotinia sclerotiorum, Botrytis cinerea)
|
Apply DELARO 325 SC Fungicide at 880 mL/ha
|
Begin fungicide applications at the beginning of flowering or at first sign of disease. When disease pressure is high or when agronomic or weather conditions are conducive to disease development, make a second application 10 to 14 days later.
|
|
Restrictions: The application may be made by ground or aerial spray equipment. A maximum of two applications may be applied to alfalfa per crop per year. DO NOT apply within 30 days of harvest. DO NOT cut treated fields for hay/forage. DO NOT graze treated fields. DO NOT feed seed screenings and aftermath to livestock.
|
As this product is not registered
for the control of pests in aquatic systems, DO NOT use to control
aquatic pests. DO NOT contaminate irrigation or drinking water supplies
or aquatic habitats by cleaning of equipment or disposal of wastes.
DELARO 325
SC Fungicide may be applied to all labelled crops by ground or aerial spray
equipment.
Field sprayer application: DO NOT apply during
periods of dead calm. Avoid application of this product when winds are gusty. DO
NOT apply with spray droplets smaller than the American Society of
Agricultural Engineers (ASAE S572.1) medium classification. Boom height must be
60 cm or less above the crop or ground.
Aerial application: DO NOT apply during
periods of dead calm. Avoid application of this product when winds are gusty. DO
NOT apply when wind speed is greater than 16 km/h at flying height at the
site of application. DO NOT apply with spray droplets smaller than the
American Society of Agricultural Engineers (ASAE S572.1) medium classification.
Reduce drift caused by turbulent wingtip vortices. The nozzle distribution
along the spray boom length MUST NOT exceed 65% of the wing- or
rotorspan.
Tank Mixes:
This product may be tank mixed with registered
pest control products, whose labels also allow tank mixing, provided the
entirety of both labels, including Directions For Use, Precautions,
Restrictions, Environmental Precautions, and Spray Buffer Zones are followed
for each product. In cases where these requirements differ between the tank mix
partner labels, the most restrictive label must be followed. Do not tank mix
products containing the same active ingredient unless specifically listed on
this label.
In some cases, tank mixing pest control
products can result in reduced pesticide efficacy or increased host crop
injury. The user should contact Bayer CropScience Inc.at 1-888-283-6847 or www.cropscience.bayer.ca for information before applying any tank mix that is not
specifically recommended on this label.
Bayer CropScience Inc. has not fully assessed performance
(efficacy) and/or crop tolerance (phytotoxicity) of all potential tank mixes
under all environmental conditions or for all crop varieties. Tank mixes that are not specifically listed on this label should
be tested on a small area first, under local conditions and using standard
practices, to confirm the tank mix is suitable for widespread
application.
To determine the physical compatibility of this product with
other products, use a jar test.
Spray Buffer zones:
A spray
buffer zone is NOT required for:
- uses
with hand-held application equipment permitted on this label, and
- low-clearance
hooded or shielded sprayers that prevent spray contact with non-target crop,
fruit or foliage.
The spray buffer zones specified in the table below are
required between the point of direct application and the closest downwind edge
of sensitive terrestrial habitats (such as grasslands, forested areas, shelter
belts, woodlots, hedgerows, riparian areas and shrublands), sensitive
freshwater habitats (such as lakes, rivers, sloughs, ponds, prairie potholes,
creeks, marshes, streams, reservoirs and wetlands) and estuarine/marine
habitats.
|
Method
of application
|
Crop
|
Spray Buffer
Zones (metres) Required for the Protection of:
|
|
Freshwater
Habitat of Depths:
|
Estuarine/Marine
Habitats of Depths:
|
Terrestrial
habitat
|
|
Less than 1 m
|
Greater than 1 m
|
Less than 1 m
|
Greater than 1 m
|
|
Field sprayer
|
Wheat (spring and durum), barley, oats, triticale
|
1
|
1
|
1
|
1
|
0
|
|
Winter wheat, soybeans, corn, dry peas, faba bean, chickpeas,
lentils, potatoes, alfalfa (seed production only)
|
1
|
1
|
1
|
1
|
1
|
|
Aerial
|
Wheat (spring and durum), barley, oats, triticale
|
Fixed wing
|
10
|
1
|
10
|
1
|
0
|
|
Rotary Wing
|
10
|
1
|
5
|
1
|
0
|
|
Winter wheat, soybeans, corn
|
Fixed wing
|
10
|
1
|
10
|
1
|
2
|
|
Rotary wing
|
10
|
1
|
5
|
1
|
2
|
|
Dry peas, faba bean, chickpeas, lentils, potatoes, alfalfa
(seed production only)
|
Fixed wing
|
15
|
1
|
10
|
1
|
15
|
|
Rotary wing
|
15
|
1
|
10
|
1
|
15
|
When tank mixes are permitted, consult the labels of the
tank-mix partners and observe the largest (most restrictive) spray buffer zone
of the products involved in the tank mixture and apply using the coarsest spray
(ASAE) category indicated on the labels for those tank mix partners.
The spray buffer zones for this product can be modified
based on weather conditions and spray equipment configuration by accessing the
Spray Buffer Zone Calculator on the Pesticides portion of the Canada.ca
website.
Rotation
restrictions:
Treated
areas may be replanted with any crop specified on this label, including flax
and sugarbeet, as soon as practical after the last application. For crops not
listed on this label, do not plant back within 30 days of last application.
Section
8: Resistance Management
Resistance
Management Recommendations:
For resistance management, please note that DELARO 325 SC
Fungicide contains Group 3 and 11 fungicides. Any fungal population may
contain individuals naturally resistant to DELARO 325 SC Fungicide and other
Group 3 and 11 fungicides. A
gradual or total loss of pest control may occur over time if these fungicides
are used repeatedly in the same fields. Other resistance mechanisms that are
not linked to site of action, but specific for individual chemicals, such as enhanced
metabolism, may also exist. Appropriate resistance-management strategies
should be followed.
To delay
fungicide resistance:
·
Where
possible, rotate the use of DELARO 325 SC Fungicide or other Group 3 and 11
fungicides with different groups that control the same pathogens.
·
Do not apply
more than the indicated maximum number of applications per year specified for
each crop in the DIRECTIONS FOR USE, Section 7 table.
· Fungicide use should be
based on an integrated disease management program that includes scouting,
historical information related to pesticide use and crop rotation and considers
host plant resistance, impact of environmental conditions on disease development,
disease thresholds, as well as cultural, biological and other chemical control
practices.
· Where possible, make use
of predictive disease models to effectively time fungicide applications.
· Monitor treated fungal
populations for resistance development. Notify Bayer CropScience if reduced
sensitivity of the pathogen to DELARO 325 SC Fungicide is suspected. If
disease continues to progress after treatment with this product, do not
increase the use rate. Discontinue use of this product, and switch to another
fungicide with a different site of action, if available.
·
Contact your
local extension specialist or certified crop advisors for any additional
pesticide resistance-management and/or IPM recommendations for specific crops
and pathogens.
·
For further
information and to report suspected resistance, contact a Bayer CropScience
representative at 1-888-283-6847 or at www.cropscience.bayer.ca .
Section
9: Application Precautions
GROUND
APPLICATION:
1.
Use
well-maintained and calibrated conventional spray equipment, which provides
adequate and uniform coverage.
2.
Apply DELARO
325 SC Fungicide in a minimum of 100 L water/ha, unless otherwise specified in
DIRECTIONS FOR USE, Section 7.
3.
Spray screens
should be no finer than 50 mesh.
4.
Ensure that the
by-pass line discharges at the bottom of the tank to minimize foaming.
5.
Maintain
pressure at no less than 275 kPa to ensure good foliage penetration and
coverage.
6.
Provincial
buffer zones that are greater than the buffer zones indicated in the DIRECTIONS
FOR USE, Section 7, should be respected.
7.
If spray
mixture remains in the tank overnight, or for long periods during the day,
agitate thoroughly prior to application.
AERIAL
APPLICATION-GENERAL INFORMATION:
1.
Apply only by
fixed-wing or rotary aircraft equipment which has been functionally and
operationally calibrated for the atmospheric conditions of the area and the
application rates and conditions of this label.
2.
Label rates,
conditions and precautions are product specific. Read and understand the
entire label before opening this product. Apply only at the rate recommended
for aerial application on this label. Where no rate for aerial application
appears for the specific use, this product cannot be applied by any type of
aerial equipment. If you have questions, call 1-888-283-6847 or obtain
technical advice from the distributor or your provincial agricultural
representative.
3.
Ensure uniform
application. To avoid streaked, uneven or overlapped application, use
appropriate marking devices.
4.
Apply DELARO
325 SC Fungicide in a minimum of 50 L of water/ha.
5.
To ensure
proper coverage and distribution and to minimize drift, check to see that swath
width and droplet size are adequate, and that wind velocities are low.
6.
Use mechanical
flaggers only.
AERIAL
APPLICATION-USE PRECAUTIONS:
1.
Apply only when
meteorological conditions at the treatment site allow for complete and even
crop coverage.
2.
Apply only
under conditions of good practice specific to aerial application as outlined in
the National Aerial Pesticide Application Manual, developed by
the Federal/Provincial/Territorial Committee on Pest Management and Pesticides.
AERIAL
APPLICATION- OPERATOR PRECAUTIONS:
1.
Read and
understand the entire label before opening this product. If you have questions,
call the manufacturer at 1-888-283-6847 or obtain technical advice from the
distributor or your provincial agricultural representative.
Section
10: Mixing Instructions
Mixing
Instructions:
·
DELARO 325 SC
Fungicide must be applied with properly calibrated, clean equipment. Prior to
adding DELARO 325 SC Fungicide to the spray tank, ensure that the spray tank is
thoroughly clean.
·
Add one-half of
the required amount of water to the spray or mixing tank and start agitation.
·
Add the
required quantity of DELARO 325 SC Fungicide and any permitted tank mix
partners to the water following the WALES mixing order. Complete filling with
water to the required total volume.
·
Maintain
agitation throughout mixing and spraying.
Section
11: Pre-harvest Intervals
|
Crop
|
PHI (days)
|
|
Wheat, Barley, Oats, Triticale
|
45
|
|
Dry Pea, Faba Bean, Chickpea,
Lentils, Field Corn, Popcorn, Alfalfa (seed production only)
|
30
|
|
Soybean
|
20
|
|
Sweet Corn, Potatoes
|
14
|
Section
12: Notices
NOTICE TO
USER:
This pest
control product is to be used only in accordance with the directions on the
label. It is an offence under the Pest Control Products Act to use this
product in a way that is inconsistent with the directions on the label.
For more information
contact:
Bayer
CropScience Inc.
Suite
200, 160 Quarry Park Blvd., SE
Calgary,
AB
T2C 3G3
DELARO®
is a registered trademark of Bayer.
All other
products mentioned are trademarks of their respective companies.
